Skip to content

CE Smart Home™ Garden Power Stake

Device Template~

{"NAME":"CE Power Stake","GPIO":[255,255,255,255,56,57,255,255,21,17,255,255,255],"FLAG":0,"BASE":18}

Connection~

This 6-outlet outdoor garden power stake is controlled by a standard ESP-12 chip connected to a single relay, meaning that all 6 outlets are on or off simultaneously. It also has a mains switch, a manual relay trigger button, and an LED indicator.

Programmer Power Stake
3V3 VCC
TX RX
RX TX
GND GND

The button is not connected to D0, so you will need to shunt D0/GPIO0 to GND to enable programming mode. You may need to briefly shunt RESET to GND in order to initiate connections to the device.

Internal Device Image~

[[https://github.com/untergeek/shared_images/blob/master/devices/powerstake/powerstake_esp12s.jpg|alt=PowerStake Pinout]]

Generic Module Config~

[[https://github.com/untergeek/shared_images/blob/master/devices/powerstake/powerstake_tasmota_config.jpg|alt=Generic Module Config]]

Additional Information~

This device was found at Costco, and in fact appears to be made for Costco (see image below). The regular price was $13.97 USD, but was on sale for Christmas for $9.99 USD.

[[https://github.com/untergeek/shared_images/blob/master/devices/powerstake/powerstake_front.jpg|alt=PowerStake Box Front]] [[https://github.com/untergeek/shared_images/blob/master/devices/powerstake/powerstake_rear.jpg|alt=PowerStake Box Rear]] [[https://github.com/untergeek/shared_images/blob/master/devices/powerstake/powerstake_side1.jpg|alt=PowerStake Box Side 1]] [[https://github.com/untergeek/shared_images/blob/master/devices/powerstake/powerstake_side2.jpg|alt=PowerStake Box Side 2]]

[[https://github.com/untergeek/shared_images/blob/master/devices/esp12-pinout.png|alt=ESP12]]